Other Systems
16mm System
28mm System
Metric Spacing
Inch Spacing
Tables
Fixtures
Tech Cart
- 2 sizes 24" × 18" or 36" × 24"
- 5/8" holes on a 2" Grid
- 36.5" Working Height
- 2 pegboards Hooks Included
-
Estimated delivery: Oct 05 - Oct 09
Couldn't load pickup availability
5/8" System · Mobile Workstation
Tech
Cart
A welding work surface and tool storage on one rolling cart. A 24" × 18" or 36" × 24" steel top with Ø5/8" holes on a 2" grid, on an aluminum frame with a yellow pegboard at each end.
- 2 sizes · 2 tops
- Pegboards included
Overview
A 5/8" fixturing top that rolls
The Tech Cart puts a 5/8" system table top on a rolling aluminum frame. Choose a 24" × 18" or 36" × 24" top, in 10 mm manganese phosphate or 12 mm nitrided steel, both with Ø5/8" holes on a 2" grid for clamps, fixtures and workholding accessories.
Each short end carries a yellow steel pegboard with hooks, so the tools you use most hang right at the work.
Add the 12-pc Clamping Kit as an option and the cart comes ready to fixture.
- Table top
- 24" × 18"or 36" × 24" (610 × 457 / 914 × 610 mm)
- Top options
- 0.39" or 0.47"10 mm phosphate or 12 mm nitrided steel
- Fixturing holes
- Ø5/8"on a 2" (50.8 mm) grid
- Working height
- 36.5"927 mm, both sizes
- Frame
- 1.57" square40 × 40 mm 6061 aluminum extrusion
Sizes
Two sizes,
one working height
Pick a size to see its frame drawing and numbers. Both come with either top and stand the plate at 36.5".
- Working height
- 36.5"927 mm to the top of the plate, same on both sizes
- Table top
- 24" × 18"0.39" or 0.47" (10 or 12 mm) steel
- Fixturing holes
- 10812 across × 9 deep, Ø5/8" on 2" centers
- Frame footprint
- 21.6" × 15.6"548 × 396 mm, outside the extrusion
- Frame height
- 35.4"900 mm, to the top of the frame, casters included
- Pegboard panels
- 26.7" × 12.4"677 × 315 mm, two panels
- Casters
- 4 × 3"swivel, with brakes
- Working height
- 36.5"927 mm to the top of the plate, same on both sizes
- Table top
- 36" × 24"0.39" or 0.47" (10 or 12 mm) steel
- Fixturing holes
- 21618 across × 12 deep, Ø5/8" on 2" centers
- Frame footprint
- 33.6" × 21.6"853 × 548 mm, outside the extrusion
- Frame height
- 35.5"902 mm, to the top of the frame, casters included
- Pegboard panels
- 26.7" × 18.4"677 × 467 mm, two panels
- Casters
- 4 × 3"swivel, with brakes
How it works
Roll it, hang it,
clamp it, flip it
A table and a tool board that go where the job is. What you do with it, in four moves.
-
Roll and lock
Roll the cart on its four 3" swivel casters and set the brakes to hold it in place.
-
Hang your tools
Drop the hooks into any slot on either pegboard and move them as your tools change.
-
Clamp on the grid
Set clamps, stops and fixtures in any 5/8" hole on the 2" grid.
-
Flip the top
The top is double-sided. Take out its eight screws, turn it over and it seats back on the self-locating bushings.
Construction
Steel on top,
aluminum underneath
-
Top
Two steel tops
0.39" (10 mm) manganese phosphate or 0.47" (12 mm) nitrided steel, held by eight M8 flat-head screws on locating bushings.
-
Hole pattern
5/8" on a 2" grid
Ø5/8" (15.9 mm) holes on 2" (50.8 mm) centers across the whole top, for 5/8" system clamps, stops and fixtures.
-
Frame
40 × 40 aluminum
1.57" (40 mm) square 6061 aluminum extrusion with corner brackets, on four 3" swivel casters with brakes.
-
Storage
Yellow pegboards
Two cold-rolled steel panels in gloss yellow powder coat, one on each short end, with square slots for the hooks.
Kit add-on
Add the 12-pc Clamping Kit
Order the cart with the TSB-A kit and it comes ready to fixture: two Inserta Clamps, two Inserta Pliers, four stops and four V-blocks, all sized for the 5/8" holes in the top, in a zip pouch.
How to add it: pick your size and tabletop finish, then choose 12-pc Clamping Kit under Fixture Kit before you add to cart.
Cart + kit, by size and top:
- 2×
UDN5150
Inserta Clamps
T-handle, 6.5" capacity, 300 lb clamping force
- 2×
PTT634K
Inserta Pliers
3.3" capacity, drop into any 5/8" hole
- 4×
T54205
Stops
Ø1" round stops, fit the 5/8" holes
- 4×
T54216
V-Blocks
Aluminum, 120° V for holding round stock
- 1×
TSB366-P
Tool Pouch
12" × 8" nylon zip pouch; the whole kit weighs 7.7 lb (3.5 kg)
What's included
Everything in
the order
Same contents on both sizes, with the top you picked. The clamping kit comes only with the kit option.
- 1Cart frame40 × 40 aluminum, 4 swivel casters with brakes
- 1Steel top10 mm phosphate or 12 mm nitrided, your choice
- 8Top mounting setsM8 × 45 flat-head screw, locating bushing, washer
- 2Pegboard panelsyellow powder-coated steel, one per short end
- 4Pegboard hooks2 double, 2 single
- 12-pc Clamping Kitonly with the kit option, or sold separately as TSB-A
The top ships loose with its eight screw sets. [CONFIRM: frame ships assembled or flat, carton size and ship weight]
Specifications
Every number,
both sizes
Top size
TEC241824" × 18"609.6 × 457.2 mmTEC362436" × 24"914.4 × 609.6 mmFixturing holes
TEC241810812 across × 9 deepTEC362421618 across × 12 deepHole size & grid
Ø5/8" on 2" centersØ0.62" (15.9 mm) · 2" (50.8 mm) gridBoth sizesTop options
0.39" or 0.47"10 mm manganese phosphate or 12 mm nitrided steelBoth sizesSides
Double-sidedflips and re-seats on its locating bushingsBoth sizesTop mounting
8 × M8 × 45flat-head screws with locating bushings and washersBoth sizes
Working height
36.5"927 mm to the top of the plateBoth sizesFrame footprint
TEC241821.6" × 15.6"548 × 396 mmTEC362433.6" × 21.6"853 × 548 mmFrame height
TEC241835.4"900 mm, casters includedTEC362435.5"902 mm, casters includedExtrusion
1.57" square aluminum40 × 40 mm 6061 extrusion, 40-series T-slotBoth sizesUprights
29.9"759 mm, 4 per cartBoth sizes
Casters
4 × 3"swivel, with brakes, M12 stemBoth sizesPegboard panels
TEC241826.7" × 12.4"677 × 315 mm, 2 per cartTEC362426.7" × 18.4"677 × 467 mm, 2 per cartPanel material
1.2 mm steelcold-rolled, gloss yellow powder coatBoth sizesSlots
0.33" square8.5 mm, 1.3" (33 mm) deep panelBoth sizesHooks
42 double, 2 singleBoth sizes
Cart weight
TEC2418[CONFIRM]by top thicknessTEC3624[CONFIRM]by top thicknessPegboard panel, each
TEC24185.2 lb2.35 kgTEC36247.4 lb3.37 kgRated capacity
[CONFIRM]no load rating on fileBoth sizesShipping
[CONFIRM]carton size, ship weight, assemblyBoth sizes
FAQ
Questions, answered
Fit, materials, height and what ships.
- Will my 5/8" clamps and fixtures fit?
- Yes. The top has Ø5/8" holes on a 2" grid, so it fits 5/8" system clamps, stops and fixturing tools.
- Is the frame steel?
- No. The frame is 6061 aluminum extrusion; the top is the steel part, 10 mm or 12 mm thick.
- Can I buy the clamping kit later?
- Yes. The same 12-pc kit is sold on its own as the TSB-A.
- Does it come assembled?
- [CONFIRM] The top ships loose with its eight M8 screw sets.
- How much weight can it hold?
- [CONFIRM: rated capacity]
