Yoke Pipe Vise with Fasteners
- 4" / 5" Max pipe diameter
- 4" × 2" 3-hole pattern
- 3 × M12 Bolts included
- 12.4 / 18.4 lb Weight, 4" / 5"
-
Estimated delivery: Nov 20 - Nov 24
Couldn't load pickup availability
Overview
Pipe held
on the table
A yoke pipe vise holds round pipe between serrated jaws, clamped from above by a T-handle screw. The yoke is hinged, so it swings open to take the pipe and latches shut over it.
The cast-iron base bolts to your table through three holes. The M12 bolts, washers and nuts come in the box.
Two sizes: the YPV004 for pipe up to 4" and the YPV005 for pipe up to 5".
- Max pipe diameter
- 4" / 5"YPV004 / YPV005
- Mounting holes
- 3Ø0.63" (16 mm) through
- Hole pattern
- 4" × 2"102 × 51 mm, both sizes
- Fasteners
- M123 bolts, 6 washers, 3 nuts
- Weight
- 12.4 / 18.4 lb5.6 / 8.3 kg
Two sizes
4-inch or
5-inch
Pick a size to see its base drawing and specs. Both bolt down on the same three-hole pattern.

- Max pipe diameter
- 4"102 mm
- Base depth
- 5.6"143 mm
- Base height
- 3.1"79 mm
- Mounting holes
- 3 × Ø0.63"16 mm, 4.0" × 2.0" pattern
- Base at the holes
- 3/4"19 mm thick
- Jaw inserts
- 1.7" × 1.3"43 × 32 mm, 0.4" (10 mm) thick
- Weight
- 12.4 lb5.6 kg

- Max pipe diameter
- 5"127 mm
- Base depth
- 6.4"162 mm
- Base height
- 4.1"105 mm
- Mounting holes
- 3 × Ø0.63"16 mm, 4.0" × 2.0" pattern
- Base at the holes
- 1"25 mm thick
- Jaw inserts
- 2.3" × 1.5"58 × 38 mm, 0.5" (11 mm) thick
- Weight
- 18.4 lb8.3 kg
How it works
Bolt, open,
set, clamp
Four steps from a bare table to a clamped pipe. Both sizes work the same way.
- 01

Bolt it down
Line the three base holes up with holes in the table top and bolt through with the M12 bolts, washers and nuts.
- 02

Open the yoke
Release the latch and swing the yoke open on its hinge.
- 03

Set and latch
Lay the pipe on the lower jaws, swing the yoke closed over it and let the latch lock it.
- 04

Clamp it
Turn the T-handle to bring the upper jaw down onto the pipe.
Construction
Cast iron,
serrated jaws
-

Body
Cast-iron yoke
The base and the hinged yoke are cast iron.
-

Jaws
Serrated, top and bottom
Serrated jaws above and below the pipe. The inserts are ETD-150 steel with a black-oxide finish.
-

Lower jaw
Set in a V
Two serrated inserts form a V for the pipe to sit in.
-

Base
3/4" or 1" at the holes
The base is 3/4" (19 mm) thick at the mounting holes on the 4" and 1" (25 mm) on the 5".
Works with
Bolts to
5/8" tables
The three base holes line up with 5/8" holes on a 2" grid, so the vise bolts straight through a perforated table top.
Shop Alpha 5/8" tablesIn the box
What's included
The vise and everything to bolt it down. Both sizes ship with the same fastener set.
- 1×
Yoke pipe viseThe 4" (YPV004) or the 5" (YPV005), whichever size you choose. - 3×
M12 hex boltsM12 × 1.75, 60 mm long, grade 8.8. - 6×
M12 flat washersFlat washers sized for M12, two per bolt. - 3×
M12 hex nutsM12 × 1.75, one per bolt.
Not included: the welding table. See the tables it bolts to above.
Specifications
Every number
Max pipe diameter
YPV0044"102 mmYPV0055"127 mmJaws
Serratedtop and bottomBothLower jaw
V-shapedtwo serrated insertsBothJaw insert size
YPV0041.7" × 1.3"43 × 32 mm, 0.4" (10 mm) thickYPV0052.3" × 1.5"58 × 38 mm, 0.5" (11 mm) thickJaw insert material
ETD-150 steelblack-oxide finishBothClamping
T-handle screwhinged yoke with latchBoth
Base depth
YPV0045.6"143 mmYPV0056.4"162 mmBase height
YPV0043.1"79 mmYPV0054.1"105 mmBase thickness at holes
YPV0043/4"19 mmYPV0051"25 mmMounting holes
3 × Ø0.63"16 mm, throughBothHole pattern
4.0" × 2.0"101.6 × 50.8 mm: two holes 4" apart, third hole 2" backBothBody
Cast ironBoth
Bolts
3 × M12 × 1.7560 mm long, grade 8.8, 19 mm hex head, 30 mm min. threadBothWashers
6 × M12 flat24 mm OD, 13 mm ID, 2.3–2.7 mm thickBothNuts
3 × M12 × 1.75hex, 19 mm across flats, 10 mm tallBothWrench size
19 mmbolt heads and nutsBoth
Weight
YPV00412.4 lb5.6 kgYPV00518.4 lb8.3 kgSKU
YPV004YPV0044" yoke pipe viseYPV005YPV0055" yoke pipe viseUPC
YPV004679352024127YPV005679352024134
FAQ
Questions, answered
Short answers on mounting and hardware.
- Do I need to drill my table?
- Not on a table with 5/8" holes on a 2" grid. The base holes sit 4" apart with the third 2" back, so all three land on holes in the top.
- Do both sizes use the same bolts?
- Yes. The 4" and the 5" share the same hole pattern and ship with the same three M12 × 60 mm bolts, six washers and three nuts.
- What wrench do I need for the hardware?
- 19 mm. The bolt heads and the nuts are both 19 mm across the flats.







