Rhino Scissor Lift
48" x 30" · manual hydraulic
Includes a 5/8" tabletop
Foot pumpraise and lower
5/8" topsame as Rhino Cart
From $3,453
Shop nowBuildPro · all welding tables
Which table
is right for you?
The lineup
7table series
3hole systems
26sizes & versions
6lifts & positioners
-
5/8" system
Alpha 5/8
The only 5/8" table with self-locating plates on the top and all four sides, so you clamp square to the top or to any edge. Hardened P20 tool steel, nitrided on every table.
- 5
- fixturing sides
- 0.47"
- plate
5 sizes4' x 4' to 10' x 5' -
-
5/8" system
MAX Slotted
The MAX build with open 1.7" slots between the plates, so clamps and pliers slide along the slot instead of hopping hole to hole. Seven sizes, starting at 2' x 3'.
- 1.7"
- open slots
- 0.630"
- plate
7 sizes2' x 3' to 8' x 4' -
5/8" system
Rhino Cart
A nitrided, reversible 5/8" tabletop on a steel cart with locking casters, leveling feet, shelves and a pegboard. Add the 66-piece kit and it is a turnkey fixturing station.
- 66 pc
- kit option
- 0.630"
- plate
3 sizes48" x 30" to 48" x 48"From $2,565
Shop Rhino Cart -
5/8" / 16 mm system
Scout 36
A nitrided 36" x 6" fixturing plate on an aluminum beam with folding legs. It takes the same 5/8" (or 16 mm) tooling as the big tables, one person carries it, and two make a full-length bench.
- 33–42"
- height
- 36" x 6"
- plate
2 versions5/8" holes · 16 mm holesFrom $305
Shop Scout 36 -
5/8" system
Scout Tripod
A 14" twelve-sided nitrided plate on a folding tripod with tool-less height adjustment. Fixed base for the heaviest loads, caster base to roll it, or the plate kit alone for a base you already own.
- 2,500 lb
- capacity
- 14"
- plate
3 versionsFixed base · Caster base · Plate kit onlyFrom $330
Shop Scout Tripod -
28 mm system
Alpha 28
One-inch (25 mm) P20 tool-steel plates on a machined tubular frame, with self-locating plates on the top and all four sides. Our thickest, hardest table, for heavy fabrication on 28 mm tooling.
- 5
- fixturing sides
- 1"
- plate
5 sizes1.2 x 1.2 m to 3.0 x 1.5 m -
Any system
Platforms & lifts
Scissor lifts, positioners and turntables that put your tabletop at the right height and angle. Most take whatever top you run.
- 8,800 lb
- top capacity
- Any
- tabletop
6 optionslifts, rotary positioners and a turntableFrom $3,159
See platforms & lifts
Not sure yet? Compare all seven side by side or plan a setup in the Studio
Compare · all seven series
Side by side.
Every series side by side. Hide the ones you have ruled out, or highlight only what differs.
Show
Series
Hole systemdiameter and grid
5/8"2" grid
5/8"2" grid
5/8"2" grid
5/8"2" grid
5/8" or 16 mm2" grid on 5/8"
5/8"2" grid
28 mm100 mm grid
Fixturing sideswhere you can clamp
5top + 4 sides
1top only
1top only
1top only
1top only
1top only
5top + 4 sides
Plate thicknessand material
0.47"P20 tool steel, 58-62 HRC
0.630"medium carbon steel, HV 550
0.630"medium carbon steel, HV 550
0.630"steel, nitrided
5/8"steel, nitrided
5/8"steel, nitrided
1"25 mm, P20 tool steel, 58-62 HRC
Slotsbetween plates
Nonesolid top
Nonesolid top
1.7"open slots between plates
Nonesolid top
Nonesolid plate
Nonesolid plate
Nonesolid top
Flatnesspublished tolerance
±0.005"per 24" x 24"
±0.005"per 24" x 24"
±0.005"per 24" x 24"
±0.015"per 24" x 24"
Machined flatno published tolerance
Machined flatno published tolerance
±0.125 mmper 600 x 600 mm
Finishtabletop surface
Nitrided
heat-treated, spatter and rust resistantNitridedStandard
pick either at checkoutNitridedStandard
pick either at checkoutNitrided
heat-treated, spatter and rust resistantNitrided
heat-treated, spatter and rust resistantNitrided
heat-treated, spatter and rust resistantNitrided
heat-treated, spatter and rust resistantReversible platesflip when worn
Top and sides
Top
Top
Top
Single plate
Single plate
Top and sides
Capacitystatic load
1,500 lbper leg, six legs
1,500 lbstatic
1,500 lbstatic
1,500 lbstatic
800 lbadjustable legs
2,500 lbfixed base; 880 lb caster base
13,200 lb6,000 kg, static
Mobilityhow it moves
Caster optionadjustable legs + casters
Caster optionadjustable legs + casters
Caster optionadjustable legs + casters
Built in4 locking casters + leveling feet
Carry itlegs fold, one person
Carry itfolds, tool-less height
Caster optionadjustable legs + casters
Sizesavailable
54' x 4' to 10' x 5'
44' x 4' to 8' x 4'
72' x 3' to 8' x 4'
348" x 30" to 60" x 30"
136" x 6" plate
114" plate
51.2 x 1.2 M to 3.0 x 1.5 M
Mounts on a liftplatforms and positioners
YesHSLT600 heavy duty lift
Yesstationary lifts, rotary positioner
Yesstationary lifts, rotary positioner
Rhino Liftmanual or electric scissor lift version
Nocarry it instead
Nocarry it instead
YesHSLT600 heavy duty lift
Best for
Side fixturing, precision assemblies
Production, most surface and holes
Sliding clamps, odd shapes, budget
Mobile shops, cobot cells, garages
Job sites, second surface
Tight spaces, long parts
Heavy structural, metric tooling
Show at least one table to compare.
Where a starting price is shown, it is the smallest size with standard legs and finish. Load capacities are static ratings; bars are relative to the Alpha 28 (13,200 lb) and to a 1" plate.
Platforms & lifts · universal, any system
Raise it. Spin it. Tilt it.
Mount your tabletop on a scissor lift, rotary positioner or turntable and put the work at the height and angle that saves your back. Most take whatever tabletop you run, so they work in every hole system.
Electric Rhino Scissor Lift
48" x 30" · 110 V
Includes a 5/8" tabletop
24¾" - 41¾"height range
1,100 lbstatic capacity
From $4,152
Shop now
Stationary Scissor Lifts
for 5/8" tabletops · made in USA
Add your own tabletop
8.5" - 48"height range
1,500 - 4,200 lbthree capacities
From $5,084
Shop nowHeavy Duty Electric Lift
HSLT600 · 5/8" or 28 mm tabletops
Add your own tabletop
8,800 lbcapacity
Electrichydraulic
From $8,500
Shop now
Rotary Positioners
for MAX and MAX Slotted tops · made in USA
Add your own tabletop
2,400 lbcapacity
15°locking increments
From $7,585
Shop now
E-Lift Turntable
29.5" x 29.5" · 5/8" top
Includes a 5/8" tabletop
360° / 45°rotate and tilt
31.5" - 45.3"height range
From $3,159
Shop nowStationary lifts, the HSLT600 and rotary positioners take your own tabletop, so they fit any system. The Rhino lifts and E-Lift Turntable ship with a 5/8" top. Stationary lifts and rotary positioners are made in the USA.
Blemished & open box · 14 in stock right now
Same steel. A few marks. A smaller number.
Open-box and cosmetically blemished tables, tabletops, carts and lifts, unused and fully functional, priced well under new. Each listing photographs the exact unit you get.
Unused and fully functional. Scratches, scuffs or open packaging only. Same hole pattern, same flatness spec.
Photos show the actual unit. Review them before you buy; what you see is what ships.
Sold as-is, final sale. No returns or exchanges on blemished and open-box items.
5/8"
Reversible Table Plates for Alpha 5/8, 48" x 8" [Blemished]
$399.00$798.00
5/8"
Stationary Scissor Lift Platform, 36" x 48" (Blemished)
$3,813.00$6,355.00
5/8"
RhinoCart Tabletop + Frame + Handle, 48" x 30" (Blemished)
$1,519.00$2,170.00
5/8"
Alpha 5/8 5-Sided Tabletop, 96" x 48" [Blemished]
$5,498.50$7,855.00
28 mm
2.4 x 1.2 M 5-Sided Tabletop, Cast Iron, 28 mm (Blemished)
$6,681.50$9,545.00
28 mm
1.5 x 1.0 M 5-Sided Tabletop, Cast Iron, 28 mm (Blemished)
$4,539.50$6,485.00
5/8"
MAX Table Plate, 46" x 6.3" x 5/8" (Standard)
$271.60$388.00
5/8"
MAX Table Plates, 46" x 6.3" x 5/8" (Nitrided)
$356.30$509.00
5/8"
E-Lift Turntable [Blemished]
$2,660.00$3,325.00
5/8"
MAX 5' x 3' Table, R1 model
$3,905.75$4,595.00
5/8"
MAX 4' x 4' Table, R1 model
$3,238.50$3,810.00
28 mm
U28 5-Sided Tabletop, 96" x 48"
$8,113.25$9,545.00
28 mm
U28 5-Sided Tabletop, 72" x 36"
$5,512.25$6,485.00
28 mm
U28 5-Sided Tabletop, 48" x 48"
$5,202.00$6,120.00
5/8"
Rhino Cart Tabletop, 48" x 30" [Blemished]
$1,389.50$1,985.00
Recent snapshot · this list refreshes itself from the store every time the page loads
