Enclosed External Hitch Mount
2"
Receiver Fit
5/8" on 2"
Table Mount
4× Knurled
Thumb Screws
Black Oxide
Steel
-
Estimated delivery: Sep 16 - Sep 20
No se ha podido cargar la disponibilidad de recogida
THV618-XV Product Overview
Park the truck, keep the vise. The THV618-XV is a 2" receiver tube welded to a flat steel plate. Bolt it to a BuildPro table, a welding fixture, or a wooden bench and the THV618 Trailer Hitch Vise slides in and pins in place exactly like it does on the truck.
The tube is enclosed on all four sides, so the vise shank never touches the table under it. Four 1/4-20 knurled thumb screws pull the shank tight against the tube: no slop, no rattle while you hammer or wrench on the vise.
Four 0.69" (17.5mm) holes on 4" (101.6mm) centers line up with 5/8" holes on 2" spacing (or 16mm on 50mm) for a direct drop onto fixture tables. Six 0.35" (9mm) holes let you lag it to any bench top. Steel, black oxide finish.
Click to enlarge - Receiver Fit
- 2" square (51mm)
- Base Plate
- 8.0" x 5.6" (203 x 143mm)
- Overall Height
- 3.7" (95mm) incl. screws
- Plate Thickness
- 0.31" (8mm)
- Table Mount
- 5/8" on 2" or 16mm on 50mm
- Bench Holes
- 6× 0.35" (9mm)
- Thumb Screws
- 4× 1/4-20 knurled, included
- Material
- Steel black oxide finish
- Fits
- THV618 Trailer Hitch Vise
- Weight
- 1.0 lb (0.46 kg)
The vise stays. The truck doesn't have to.
Closed on all four sides
A 2" (51mm) square receiver tube welded to the plate, closed top, sides and bottom. The vise shank rides in steel, never on your table surface.
No slop, no rattle
Four 1/4-20 knurled thumb screws, two on top and two on the side, pull the shank tight against the tube. Finger tight is all it takes.
Pins in like the truck
A cross hole lines up with the vise's hitch pin. Slide in, drop the pin, clip it: the vise is locked exactly the way it is in a receiver.
Drops onto BuildPro
Four 0.69" (17.5mm) holes on 4" (101.6mm) centers land on 5/8" holes with 2" spacing, or 16mm holes on 50mm. Ball lock bolts or 5/8" bolts and it's a bench vise.
Any bench top
Six 0.35" (9mm) holes around the plate take lag screws or bolts, so it mounts to a wooden bench, a steel bench, or a fixture as easily as a fixture table.
Truck vise, bench vise
Sized for the THV618 Trailer Hitch Vise. One vise for the truck and the shop: pull it off the hitch, slide it into the mount, tighten the screws.
8" x 5.6" footprint
The plate is 8.0" x 5.6" (203 x 143mm) and 0.31" (8mm) thick. Flat and low, so the vise sits close to the table and the plate stays out of the way.
Black oxide finish
Welded steel with a black oxide finish. Built for long-lasting use in a shop full of grime and spatter.
THV618 Trailer Hitch Vise
The THV618-XV is the shop half of the THV618. The vise rides in any 2" truck or trailer receiver; this mount gives it a second home on the table, so one vise covers the job site and the shop.
Cast in 60,000 PSI ductile iron with 7,700 lbs of clamping force, a cast-in anvil, serrated pipe jaws and four locating pins. Sold separately.
- 7,700 lbsClamping force
- 5.7" (146mm)Max jaw opening
- 2" receiverHitch pin included
What's in the box
- 1× THV618-XV Enclosed External Hitch MountSteel, black oxide finish, 2" enclosed receiver tube on an 8.0" x 5.6" plate
- 4× 1/4-20 knurled thumb screwsTwo on top, two on the side. Pull the vise shank tight against the tube
Vise sold separately; the hitch pin and R-clip come with the THV618 vise. Table bolts and bench screws are not included.
FAQ
Straight answers on what the THV618-XV fits, what it bolts to, and what comes in the box. Scroll the list for more.
No. The THV618-XV is the mount only. It is sized for the THV618 Trailer Hitch Vise, sold separately.
BuildPro and any fixture table with 5/8" holes on 2" centers, or 16mm holes on 50mm centers. The four 0.69" (17.5mm) plate holes sit on 4" (101.6mm) centers, so they land on every other hole of the grid. Use 5/8" or 16mm bolts, or ball lock bolts.
Yes. Six 0.35" (9mm) holes around the plate take lag screws or through-bolts, so it goes on a wood top, a steel bench, or a fixture.
The receiver is closed on all four sides, so the vise shank rides in steel and never touches the surface underneath. An open three-sided mount lets the shank rub on the table.
Four 1/4-20 knurled thumb screws, two on top and two on the side, pull the vise shank tight against the tube. No slop or rattle when you hammer or wrench on the vise.
Yes. A cross hole in the tube lines up with the vise's hitch pin, so it pins in place the same way it does in a truck receiver.
The four knurled thumb screws are included. Table bolts and bench screws are not, since the right fastener depends on what you mount it to. The hitch pin and R-clip come with the THV618 vise.
The plate is 8.0" x 5.6" (203 x 143mm) and 0.31" (8mm) thick. With the tube and thumb screws it stands 3.7" (95mm) tall.
Steel with a black oxide finish.
