Wheel and Handle Set for TSB366
Ø3.9"
Polyurethane Wheels
4× Pins
O-Ring Grip
Upright
Stands on Its Own
Zinc-Plated
Steel Brackets
-
Estimated delivery: Sep 16 - Sep 20
No se ha podido cargar la disponibilidad de recogida
TSB-WHS Product Overview
Move the sawhorse without carrying it. The TSB-WHS is a two-piece set for the TSB366 sawhorse top: a wheel set with two 3.9" (100mm) polyurethane wheels, and a handle set. Each piece pins into the holes at the outer edge of the top, one on each end.
Fold the legs, tip the sawhorse back onto the wheels and roll it by the handle. When you get where you're going, it stands upright on its own.
Each piece has two 0.63" (16mm) locating pins on 4.0" (102mm) centers, and every pin wears O-rings for a snug fit, so the set doesn't pop out on you. Zinc-plated steel brackets and axle. Made for the TFSH48 and TFSH50 sawhorse legs.
Click to enlarge 
Click to enlarge - Fits
- TSB366 sawhorse top
- Legs
- TFSH48 / TFSH50 sawhorse legs
- Wheels
- 2× Ø3.9" (100mm) polyurethane
- Wheel Set Width
- 12.7" (322mm)
- Handle Set
- 5.9" x 4.4" (150 x 113mm)
- Locating Pins
- 4× Ø0.63" (16mm), 2 per piece
- Pin Spacing
- 4.0" (102mm) centers
- Pin Length
- 1.0" (25mm)
- Pin Grip
- O-rings on every pin
- Material
- Steel zinc-plated brackets
Tip it, roll it, stand it up.
Pins into the top
Two locating pins on each piece press into the holes at the outer edge of the TSB366 top. Wheels go on one end, the handle on the other.
Won't pop out
Every 0.63" (16mm) pin wears O-rings for a snug fit in the holes, so the set stays put while you tip and roll the sawhorse.
Same fit, other end
The handle set pins into the opposite end the same way, so there's a handle to grab at the far end from the wheels.
Much easier to move
Fold the legs, tip the sawhorse back onto the wheels and roll it by the handle instead of carrying the whole sawhorse.
Stands on its own
Set it down on the wheel end and the TSB366 stays upright by itself. Park it and walk away; it's still standing when you come back.
3.9" wheels, wide stance
Two 3.9" (100mm) polyurethane wheels on a 12.7" (322mm) wide wheel set, more than twice the 6" width of the sawhorse top.
Zinc-plated steel
Steel brackets and axle with a zinc-plated finish, black oxide steel locating pins and nitrile rubber O-rings.
Easy to remove
Pull the pins back out once the sawhorse is where it needs to be. The set comes off by hand, the same way it went on.
Scout 36 Sawhorse (TSB366)
The TSB-WHS is made for the TSB366 top plate and beam, the 36" x 6" top of the Scout 36 sawhorse, on TFSH48 or TFSH50 legs. Pin the set on and the whole sawhorse rolls.
The top is a 5/8" thick nitride-coated steel plate that takes standard Inserta clamps, pins and fixtures. Sawhorse sold separately.
- 36" x 6"Top plate
- 5/8" thickNitride-coated steel
- 5/8" systemInserta compatible
What's in the box
- 1× Wheel setZinc-plated steel bracket and axle, two 3.9" (100mm) polyurethane wheels, handle, two locating pins with O-rings
- 1× Handle setZinc-plated steel bracket with handle, two locating pins with O-rings
Arrives assembled [CONFIRM], ready to pin into the TSB366 top. Sawhorse top and legs sold separately.
FAQ
Straight answers on what the TSB-WHS fits, how it goes on, and what comes in the box. Scroll the list for more.
The TSB366 top plate and beam, the 36" x 6" top of the Scout 36 sawhorse. It works on the TFSH48 and TFSH50 sawhorse legs.
Each piece has two locating pins that press into the holes at the outer edge of the top: the wheel set on one end, the handle set on the other.
No. Every pin has O-rings for a snug fit in the holes, so the set doesn't pop out on you.
Yes. Stand the folded sawhorse on the wheel end and it stays upright on its own.
No. The pins press in and pull out by hand. The set arrives assembled [CONFIRM].
3.9" (100mm) polyurethane wheels, two on the wheel set. The wheel set is 12.7" (322mm) wide overall.
5.9" (150mm) wide and 4.4" (113mm) deep, with its two pins on 4.0" (102mm) centers, the same spacing as the wheel set.
Zinc-plated steel brackets and axle, black oxide steel locating pins, nitrile rubber O-rings and polyurethane wheels.
No. The TSB-WHS is the wheel set and handle set only. The TSB366 top and the sawhorse legs are sold separately.
