Other Systems
16mm System
28mm System
Metric Spacing
Inch Spacing
Tables
Fixtures
Scissor Lift Sawhorse, 5/8" System
- 2 sizes Table Top
- 5/8" holes 2" Grid
- Up to 53.1" Table Height
- 3/4" hex Drill Drive
-
Estimated delivery: Nov 07 - Nov 11
No se ha podido cargar la disponibilidad de recogida
Overview
Crank it to working height
The Scissor Lift Sawhorse puts a 5/8" fixturing top on a hand-crank scissor lift. Crank it (or run it with a drill) and set your work at the height that suits the job instead of bending to a fixed bench.
The top is a 5/8"-thick 45-steel plate with 5/8" holes on a 2" grid, nitrided and oxidized for wear and rust resistance, so it takes the same 5/8" clamps and fixturing accessories as the rest of the Strong Hand Tools 5/8" system. Underneath, a powder-coated Q235 steel frame rides on four locking polyurethane casters, with four rubber-padded leveling feet to plant it once it is in position.
Choose the 48" × 8" (TSC4808) or the 60" × 10" (TSC6010). Each size is a complete lift sized for its top; full dimensions for both are below.
- Top plate
- 5/8" thick0.63" (16 mm) 45 steel, nitrided
- Hole pattern
- 5/8" on 2"Ø0.625" (15.88 mm) · 2" (50.8 mm) grid
- Lift drive
- Hand crankremovable, 3/4" (19 mm) hex for a drill
- Frame
- Q235 steelpowder coated, matte black
- Base
- 4 casters + 4 feet3" locking polyurethane casters, rubber-pad leveling feet
How it works
Roll it in,
crank it up, lock it down
It arrives assembled. Casters, feet and the table top are already fitted; from the crate to working height is four moves.
-
Roll it to the job
Four 3" polyurethane casters carry the lift across the shop floor, so the table goes to the work instead of the other way round.
-
Crank to height
Clockwise raises, counterclockwise lowers. Stop anywhere from 18.1" to 47.2" on the 48" model, or 19.3" to 53.1" on the 60" model.
-
Or let a drill do it
Back off the locking screw and lift the handle away. A 3/4" (19 mm) socket on a cordless drill runs the lift through its full travel without cranking by hand.
-
Lock it down
Step on the four caster brakes, then wind down the leveling feet. The rubber pads take the weight off the wheels and plant the lift on the floor.
Construction
Built like a fixturing table
-
Table top
5/8" holes on a 2" grid
96 holes on the 48" top, 150 on the 60" top. Ø0.625" (15.88 mm) holes on 2" (50.8 mm) centers across the whole plate.
-
Plate
5/8" nitrided steel
0.63" (16 mm) 45 steel, nitrided and oxidized. The treatment hardens the surface and resists rust; the top face is finished flat to 0.012" (0.3 mm) afterward.
-
Frame
Powder-coated steel
Q235 steel scissor arms and base (equivalent to A36), matte black powder coat. The lift table frame is finished in Strong Hand Tools yellow.
-
Range
Drops low, rises high
Cranked down it is a low platform; cranked up it stands above bench height. Up to 29.1" of travel on the 48" model and 33.9" on the 60" model.
Two sizes
Two sizes,
two lifts
Pick a size to see its dimension drawing and specs. Each top rides on its own scissor lift and base, sized and rated for it; the crank drive, casters and leveling feet are common to both.
- Rated capacity
- 375 lb170 kg
- Table height
- 18.1"–47.2"460–1200 mm
- Lift travel
- 29.1"740 mm
- Overall length
- 48.9"1241 mm
- Base width
- 24.8"630 mm
- Fixturing holes
- 96Ø5/8" on a 2" grid
- Casters & feet
- 4 + 43" locking, rubber-pad feet
- Product weight
- 238 lb108 kg
- Crated weight
- 280 lb135 kg · 52" × 28.3" × 25.6" crate
- Rated capacity
- 595 lb270 kg
- Table height
- 19.3"–53.1"490–1350 mm
- Lift travel
- 33.9"860 mm
- Overall length
- 61.0"1550 mm
- Base width
- 28.3"720 mm
- Fixturing holes
- 150Ø5/8" on a 2" grid
- Casters & feet
- 4 + 43" locking, rubber-pad feet
- Product weight
- 322 lb146 kg
- Crated weight
- 400 lb181.5 kg · 64.6" × 32.3" × 26" crate
Kit add-on
Add the 12-pc Clamping Kit
Order the sawhorse with the Scout Series TSB-A kit and it arrives ready to fixture: two Inserta Clamps, two Inserta Pliers, four stops and four V-blocks, all sized for the 5/8" holes in the top, in a zip pouch.
How to add it: pick your size, then choose 12pc Clamping Kit under Kit Add-On before you add to cart.
- 2×
UDN5150
Inserta Clamps
T-handle, 6.5" capacity, 300 lb clamping force
- 2×
PTT634K
Inserta Pliers
3.3" capacity, drop into any 5/8" hole
- 4×
T54205
Stops
Ø1" round stops, fit the 5/8" holes
- 4×
T54216
V-Blocks
Aluminum, 120° V for holding round stock
- 1×
TSB366-P
Tool Pouch
12" × 8" nylon zip pouch; the whole kit weighs 7.7 lb (3.5 kg)
In the crate
What's included
Ships fully assembled, strapped to a pallet inside a plywood crate. Lift the lid, cut the film and roll it off the pallet.
1 
2 - 1×Scissor Lift SawhorseLift with the 5/8" table top installed. Choose the 48" × 8" (TSC4808) or 60" × 10" (TSC6010) top.
- 1×Crank handlePacked loose in an accessory bag inside the crate. Slides onto the drive shaft and locks with its set screw.
- Sold separately5/8" clamps and fixturing tools (or choose the 12-pc Clamping Kit add-on), and the 3/4" (19 mm) socket for drill drive.
Specifications
Every number,
both sizes
Top size
TSC480848" × 8"1219 × 203 mmTSC601060" × 10"1524 × 254 mmFixturing holes
TSC480896TSC6010150Thickness
5/8"0.63" (16 mm)Both sizesHole size & grid
Ø5/8" on 2" centersØ0.625" (15.88 mm) · 2" (50.8 mm) gridBoth sizesTop material
45 steelequivalent to AISI 1045Both sizesSurface treatment
Nitrided & oxidizedtop face flat to 0.012" (0.3 mm) after treatmentBoth sizes
Rated capacity
TSC4808375 lb170 kgTSC6010595 lb270 kgTable height
TSC480818.1"–47.2"460–1200 mmTSC601019.3"–53.1"490–1350 mmLift travel
TSC480829.1"740 mmTSC601033.9"860 mmDrive
Hand crankremovable handle with locking screwBoth sizesDrill drive
3/4" (19 mm) hexon the drive shaft under the handle, for a socket and cordless drillBoth sizes
Overall length
TSC480848.9"1241 mmTSC601061.0"1550 mmBase width
TSC480824.8"630 mmTSC601028.3"720 mmLowest table height
TSC480818.1"460 mmTSC601019.3"490 mm
Frame material
Q235 steelequivalent to A36Both sizesFinish
Powder coatedscissor arms and base matte black; table frame Strong Hand Tools yellowBoth sizesCasters
4 × 3" lockingpolyurethane wheels, foot-operated brakesBoth sizesLeveling feet
4 screw-downrubber padsBoth sizes
Product weight
TSC4808238 lb108 kgTSC6010322 lb146 kgCrated weight
TSC4808280 lb135 kgTSC6010400 lb181.5 kgCrate size
TSC480852" × 28.3" × 25.6"1320 × 720 × 650 mmTSC601064.6" × 32.3" × 26"1640 × 820 × 660 mmPackaging
Plywood crate on a built-in palletfumigation-free wood with steel-strapped edges; ships fully assembled, crank handle in an accessory bagBoth sizes
FAQ
Questions, answered
Straight answers on sizes, the drill drive, the top and shipping.
- What is the difference between the TSC4808 and the TSC6010?
- The top, the lift and the rating. The TSC4808 has a 48" × 8" top with 96 holes on a 48.9" × 24.8" base, adjusts from 18.1" to 47.2" and is rated 375 lb. The TSC6010 has a 60" × 10" top with 150 holes on a 61" × 28.3" base, adjusts from 19.3" to 53.1" and is rated 595 lb. The crank drive, materials, finish, casters and leveling feet are the same on both.
- Can I use a drill instead of cranking?
- Yes. Lift the handle off and the drive shaft is a 3/4" (19 mm) hex; a socket on a cordless drill runs the lift.
- Does the top take my 5/8" clamps and fixturing tools?
- Yes. The top has Ø5/8" (15.88 mm) holes on a 2" (50.8 mm) grid, the same pattern as the rest of the Strong Hand Tools 5/8" fixturing tables and sawhorses.
- What is the table top made of?
- 5/8"-thick 45 steel (equivalent to AISI 1045), nitrided and oxidized. The treatment hardens the surface and resists rust.
- How much weight can it lift?
- 375 lb (170 kg) on the TSC4808 and 595 lb (270 kg) on the TSC6010. Both ratings come from the factory load test, raising and lowering the table under that load.
- How does it ship?
- Fully assembled inside a plywood crate on a built-in pallet. Crated, the TSC4808 is 52" × 28.3" × 25.6" and 280 lb; the TSC6010 is 64.6" × 32.3" × 26" and 400 lb. Only the crank handle needs fitting.
5/8" System
Works with the tools you already own
Ø5/8" holes on a 2" grid — the same pattern as the Strong Hand Tools 5/8" fixturing tables and sawhorses. Clamps, stops, rests and squares that fit 5/8" holes drop straight into the top.
BuildPro Setup Studio · 5/8" system
Plan the setup. Then buy the tools.
An interactive planner for the 5/8" system. Pick a table, drop stops, clamps, fixture blocks and rests onto the real 2" hole grid, load an example frame, and see exactly which tools the job takes before anything goes in the cart.
Built around the 5/8" hole grid. Switch the system toggle to 5/8" to see the tables the Studio plans on.
- Tool library
Inserta clamp
Riser block
Right angle bracket
Stop
Real BuildPro tooling on the real hole grid. Drag a tool from the library, drop it on a hole, and the Studio keeps the parts list for you.
